CÁC CÂU HỎI THƯỜNG GẶP
Các câu hỏi thường gặp liên quan đến lò xo, vật liệu và giải đáp từ Tokai Spring
-
Hằng số lò xo của vật liệu kim loại
Câu 1: Tuy còn tùy thuộc vào vật liệu, nhưng nói chung hệ số lò xo của vật liệu kim loại thay đổi như thế nào khi bị mỏi? Câu 2: Sự khác biệt giữa…
-
Về ứng suất uốn cho phép và điểm tới hạn (giới hạn chảy)
Câu 1. “Ứng suất uốn cho phép” và “điểm tới hạn” có giống nhau không? Câu 2: “Điểm tới hạn” và “giới hạn chảy” có giống nhau không? Trả lời…
-
Tính tần số cộng hưởng của lò xo xoắn
Làm thế nào để tính tần số cộng hưởng của lò xo xoắn? Vì có những trường hợp phần gắn vào lò xo bị rung, bộ phận đó dao động quanh một tần số nhất…
-
Dây thép piano (SWPA, SWPB)
Tôi muốn biết các đặc tính vật liệu (mô đun đàn hồi, tỷ lệ Poisson, độ cứng, mật độ, độ bền kéo, v.v.) của dây thép piano (SWPA, SWPB). Trả lờ…
-
Cách thiết kế lò xo cuộn
Làm thế nào để thiết kế một lò xo cuộn? Trả lời Cảm ơn câu hỏi của bạn. Tùy theo hình dạng của lò xo mà công thức thay đổi. Nếu bạn có t…
-
Có nên hàn thép lò xo không?
Người ta nói rằng không nên hàn thép lò xo. Bạn có thể vui lòng giải thích tại sao không? Trả lời Thép lò xo (SUP) là thép hợp kim được chế…
-
Mô đun độ cứng của vật liệu lò xo SAE9254
Mô đun độ cứng của vật liệu lò xo SAE9254 là gì? Và nó được đề cập ở đâu? Trả lời Cảm ơn rất nhiều vì câu hỏi của bạn! Theo JIS B 2704 –…
-
Vật liệu thay thế của SUS304-WPB
SUS304-WPB là vật liệu lò xo nổi tiếng ở Nhật Bản, nhưng ở Mỹ không có vật liệu nào có tên này. Thay vào đó là thép không gỉ austenit 304-V dùng làm …
-
Tại sao giá trị ứng suất cắt cho phép bằng khoảng 50% độ bền kéo?
Trả lời Chào bạn, có điều này tôi muốn hỏi.Theo biểu đồ ứng suất cắt cho phép (http://www.tokaibane.com/images/tech_coil2_05_ill.gif), giá trị…
-
SW-C và SWC, ký hiệu nào là đúng?
Tôi nhận thấy ký hiệu chính xác của dây thép kéo cứng A, B, C là SW-A, SW-B, SW-C, nhưng tôi cũng thường thấy ký hiệu SWC, SWB, SWC. Đặc biệt, khi có…